CAFS 1 - 2000 4 X 4 Ford F550 Compressed Air Foam unit This unit was built by Bridgewater Metal Industries in 2000 and uses a HD8500  Hydraulic Snuffer Unit supplied by Safety Source capable of delivering 90 gpm of CAF through 1 or 2 1.5 inch lines. This truck has a 400 gallon water tank, ground and roof ladders. It is our rapid response vehicle for all fires in our district, carries 3 Scott SCBA and spare bottles.	Engine 2 - 2005 International 1050 Pumper Engine 2 was built in 2004 by Metalfab of NB. It is an International chassis with an automatic transmission. This engine has a 1050 gpm Hale pump, Foam Pro system, carries 900 gallons of water, a 1500 gallon port-a-tank, 650 feet of 4" hose, a 1500 watt generator for scene lighting, 1 Scott SCBA.
Engine 3 - 2012 1250 Rescue Pumper   With seating for Driver/operator and 4 firefighters in SCBA equipped seats, this is our 2nd out apparatus to all calls in our district. It is equipped with a Hale 1250 pump, electronic pump controls and 800 gallons of water. It has a 10KW Hydraulic Generator, 4500 watt 360 degree Command Light, hydraulic ladder rack and over 400 cubic feet of storage space.  Check out local media story on our NEW Truck 3	Tanker 4 - 1998 International - 3000 Gallons of Water In 2004, we replaced the old chassis with this 1998 International, 475HP with 10 speed transmission. The 3000 gallon tank was refurbished and compartments have been built to carry a portable pump and other equipment. This work was and is being done by BMI.
Van 5 This is our Medical First Response vehicle and is used at other emergency calls as a personnel carrier.	our fleet of response vehicles